Home > Engine > A/C and Heating
Choose a sub category:
Blower Motor & Controls Compressor Evaporator & Condensor
Hoses & Accumulator Heater Core Heater Hoses
Sort By:
Page of 1
This plugs into the blower motor resister located on the side of the heater/ac box underneath the dash on the passenger side.  This is a 4 wire harness.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This 2 wire harness plugs into the A/C compressor and provides power to the A/C clutch.

Fits Ford Mustang Year: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This after-market heater core is a direct replacement for your 1979-93 Fox Body.

a Thisheater core is specific to factory A/C cars only.   b

 

 

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

Vacuum Check Valve for A/C Duct system. This is located on the passengers fire wall.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

Rebuilt A/C compressor for any 1982-93 5.0 Mustang with factory air. Does include clutch. There is a 90 day warranty with the purchase of the liquid line and condensor. This is to ensure there is no debris damaging the compressor. Recommend professional installation.

*This is a remanufactured A/C compressor. 

Year Range: 82,83,84,85,86,87,88,89,90,91,92,93

New condenser for 1982-93 Mustang with 5.0. This is located in front of the radiator.

Year Range: 82,83,84,85,86,87,88,89,90,91,92,93

1987-93 Ford Mustang 5.0 Complete Factory-Style A/C Air Conditioning Kit
Priced Individually $661.00
kit Price 574.95 Kit Saves You 15%
Savings: $86.05

This complete kit includes factory-style replacement parts. This is NOT a generic kit and no modifications are needed. Note: Freon and a/c oil are NOT included. All of these components are also available individually. You may consider purchasing a heater core and replacing that at the same time you replace the evaporator. This kit is compatible with both R12 & R134. The retrofit fittings are not included, you will need to purchase those separately.

This kit contains the following items:
1 - A/C Compressor (rebuilt and black in color)
1 - A/C Condenser
1 - Accumulator w/ Hose Assembly
1 - A/C Discharge Hose
1 - A/C Evaporator
1 - Liquid Line Hose

While you are putting it together there are a few rules to follow. Use di-electric grease to lube the o-rings. Any manual will say to use A/C oil, but A/C oil is thin and will dry up causing the o-rings to leak. You must vacuum the system for 30-40 minutes to boil out the moisture. When under a vacuum water boils at room temperature this is why you will see cool steam coming from the vacuum pump. On a retrofit you must use 8 ounces of Ester oil. We recommend the oil with the green dye. One ounce in the evaporator, 1 in the condenser, 2 in the accumulator and 4 in the compressor. IMPORTANT NOTE: before starting motor and A/C, turn compressor clutch by hand 20-30 times to move some of the oil out of compressor and into the line. This prevents hydro lock.

See this full article for more information: A/C Information

Year Range: 87,88,89,90,91,92,93
This heater tubeassembly is a direct OEM Ford replacement for your 1986-1993 Fox body. Theheater tube assembly is the black metal factory coolant heater tubes that runfrom the front of the intake manifold back to the rubber heater hoses on the heatercore. 

Year Range:

New accumulator tank with complete hose assembly. This attaches to the evaporator at the fire wall and goes all the way to the compressor. Recommend to replace this part when ever the A/C system has been opened. This part contains a chemical that absorbs moisture inside your A/C system to keep it working properly. This part left open to the air to long will cause the chemical to absorb its maximum capacity of moisture. This will only work for a 5.0 car.

Year Range: 86,87,88,89,90,91,92,93

New discharge line for 1986-93 5.0 Mustangs. This line connects the compressor to the condensor. This is an after market hose.

Year Range: 86,87,88,89,90,91,92,93

New evaporator core for any 1987-93 Mustang. 5.0 or 2.3.

Year Range: 87,88,89,90,91,92,93

New 1987-93 liquid line for 5.0 Mustangs. This line connects the condensor to the evaporator. TIt also contains the orfice tube. The Orfice tube is what makes the A/C cold and also acts as a filter. If you have had a compressor go bad the liquid line and the condensor MUST be replaced or you have over a 90% chance your A/C system will not work. This is an after market hose.

Year Range: 87,88,89,90,91,92,93

This is the blower motor resistor used on 1982-93 Mustangsequipped with factory A/C.  This will notfit cars without A/C or dealer installed A/C.

 

Year Range: 82,83,84,85,86,87,88,89,90,91,92,93

This is a direct replacement for the blower motor in your Fox body.

a Doesnot come with the blower wheel    b

Year Range: 86,87,88,89,90,91,92,93

Thisis a direct replacement blower motor wheel for you Fox body.

a This is the blower wheel only    b

Year Range: 82,83,84,85,86,87,88,89,90,91,92,93

This repair pigtail plugs into the A/C compressor clutch coil.  This is a 2 wire harness.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the metal fitting that screws into the passenger side of the manifold on the front.

Year Range: 83,84,85

1985 Heater Hose NOS.  May fit other years.  Correct for 1985 GT with a 4 barrel Holley carburator.  Original Ford.  NOT REPRODUCTION.

Year Range:

1986-93 Heater core supply hose.  Comes off water pump spout to supply coolant to the heater system through the metal tube attached to the top of the intake.

Year Range: 86,87,88,89,90,91,92,93

1986-93 Heater supply hose.  Connects metal heater supply tubes to the heater core on the firewall. 5/8 in diameter.  Original Ford

Year Range: 86,87,88,89,90,91,92,93

1986-93 Heater supply hose.  Connects metal heater supply tubes to the heater core.  3/4 in diameter.  Original Ford

Year Range: 86,87,88,89,90,91,92,93

1987-93 Ford Mustang 5.0 Under Hood Factory-Style A/C Air Conditioning Kit
Priced Individually $571.00
Kit Price 499.95 Kit Saves You 15%
Savings: $71.05

This is the complete o-ring kit for a 1983-93 factory a/c kit. For helpful a/c information click here.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

This complete kit includes factory-style replacement parts. This is NOT a generic kit and no modifications are needed. Note: Freon and a/c oil are NOT included. All of these components are also available individually. You may consider purchasing a heater core and replacing that at the same time you replace the evaporator. This kit is compatible with both R12 & R134. The retrofit fittings are not included, you will need to purchase those separately.

This kit contains the following items:
1 - A/C Compressor (rebuilt and black in color)
1 - A/C Condenser
1 - Accumulator w/ Hose Assembly
1 - A/C Discharge Hose
1 - Liquid Line Hose

While you are putting it together there are a few rules to follow. Use di-electric grease to lube the o-rings. Any manual will say to use A/C oil, but A/C oil is thin and will dry up causing the o-rings to leak. You must vacuum the system for 30-40 minutes to boil out the moisture. When under a vacuum water boils at room temperature this is why you will see cool steam coming from the vacuum pump. On a retrofit you must use 8 ounces of Ester oil. We recommend the oil with the green dye. One ounce in the evaporator, 1 in the condenser, 2 in the accumulator and 4 in the compressor. IMPORTANT NOTE: before starting motor and A/C, turn compressor clutch by hand 20-30 times to move some of the oil out of compressor and into the line. This prevents hydro lock.

See this full article for more information: A/C Information

Year Range: 87,88,89,90,91,92,93