Home > Engine > Cooling System
Choose a sub category:
Air Deflectors Hoses and Fittings Radiator Fan and Clutch
Radiator Water Pumps
Sort By:
Page of 1

Ford Racing Reverse rotation aluminum water pump, for 1979 & 1982-93 Mustang 5.0L engines with a Serpentine belt accessory drive. This water pump features a Standard shaft and bearing with stamped impeller which provides good flow and pressure for Mustang engines that operate below 6000 RPM. This water pump can also be used on 5.8L 1979-1993 Mustang applications using a serpentine accessory drive. This only works for Mustangs using serpentine belt accessory drive.

Year Range: 79,82,83,84,85,86,87,88,89,90,91,92,93

79-93 Four piece radiator rubber insulator set. This kit comes with the two lower rubber insulators that the radiator sits on and also the two upper insulators that attach to the two radiator support brackets.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

V8 fan shroud for 1979-85, all models. Made from original Ford tooling. Perfect fit.

Year Range: 79,80,81,82,83,84,85

These seals go on the left and right of the radiator.  They attach to the radiator support and cover the holes between the radiator and the support.  This kit includes the left and right seal with attachment hardware.  Long obsolete from Ford these are Fox Mustang Restoration exclusive.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1979-85 Complete kit to mount the fan shroud onto any 1979 to 1985 Mustang 5.0 radiator.  This kit consists of 2 shroud bolts, 2 fan shroud bolt nut clips and even the 2 hard to find lower fan shroud mounting clips.

Year Range: 79,80,81,82,83,84,85

This is a MotorCraft Ford Mustang replacement radiator cap.

Fits Ford Mustang Year: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These upper radiator brackets replace the original brackets and each set comes with stainless allen head bolts and stainless washers.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These upper radiator brackets replace the original brackets and each set comes with stainless allen head bolts and stainless washers.

Fits Ford Mustang Year: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These upper radiator brackets replace the original brackets.  This is just the stainless steel brackets.  It does not include the rubbers, bolts or washers.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This aluminum radiator comes with a large 1 row aluminumcore with plastic tanks.  This is a stockreplacement for your Fox body. Fits 4 and 8 cylinder.

 

 

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the metal fitting that screws into the passenger side of the manifold on the front.

Year Range: 83,84,85

1985 Heater Hose NOS.  May fit other years.  Correct for 1985 GT with a 4 barrel Holley carburator.  Original Ford.  NOT REPRODUCTION.

Year Range:

This replacement fan clutch allows your cooling fan to pull air through the radiator while being partially disengaged. *Special Note* this part is correct for 1985 with the plastic fan blade. It will not work for 1985 with the metal fan blade.

Year Range: 85,86,87,88,89,90,91,92,93

1986-93 Factory replacement fan blade.  Used on 5.0 V-8's.

Year Range: 86,87,88,89,90,91,92,93

Factory replacement fan shroud. Used on all 1986-93 fuel injected 5.0's

Year Range: 86,87,88,89,90,91,92,93

Complete kit to mount the fan shroud onto any 1986 to 1993 Mustang 5.0 radiator. This kit consists of 2 shroud bolts, 2 fan shroud bolt nut clips, the 2 bolts that hold the overflow bottle on with the matching nut clips and even the 2 hard to find lower fan shroud mounting clips.

Year Range: 86,87,88,89,90,91,92,93

1986-93 Original Ford upper radiator hose.

Year Range: 86,87,88,89,90,91,92,93

1986-93 Original Ford lower radiator hose.

Year Range: 86,87,88,89,90,91,92,93

1979-93 Bypass hose goes from water pump to thermostat housing.  Original Ford

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1986-93 Heater core supply hose.  Comes off water pump spout to supply coolant to the heater system through the metal tube attached to the top of the intake.

Year Range: 86,87,88,89,90,91,92,93

1986-93 Heater supply hose.  Connects metal heater supply tubes to the heater core on the firewall. 5/8 in diameter.  Original Ford

Year Range: 86,87,88,89,90,91,92,93

1986-93 V-8 (5.0) coolant over flow bottle that attaches to the fan shroud. This bottle accepts the low coolant level sensor from all years and includes the black rubber tube.

1986-93 Heater supply hose.  Connects metal heater supply tubes to the heater core.  3/4 in diameter.  Original Ford

Year Range: 86,87,88,89,90,91,92,93

This complete hose kit comes with upper and lower radiator hoses, all three heater hoses, and the bypass hose. All hoses are original Ford for a perfect fit.

Year Range: 86,87,88,89,90,91,92,93

1986-93 V-8 (5.0) coolant over flow bottle that attaches to the fan shroud. This bottle accepts the low coolant level sensor from all years and includes the black rubber tube.

Year Range: 86,87,88,89,90,91,92,93

Radiator over flow bottle cap is used when there is no low coolant level sensor.

Year Range: 86,87,88,89,90,91,92,93

1987-93 Air Deflector. Attaches to the lower radiator support to help force air into the radiator for better cooling. Perfect fit!

Year Range: 87,88,89,90,91,92,93

1987-93 Air deflector hardware kit includes everything to install the front air deflector

Year Range: 87,88,89,90,91,92,93

1979-93 Ford Mustang 5.0 Water Pump Bolt Kit
This is the complete coolant level sensor assembly that fits into the coolant overflow tank. It acts as a cap as well as senses when the coolant is low inside of the tank.

Year Range: 90,91,92,93

This water pump bolt kit is correct for all 1979-93 5.0 (302) cars.

It includes 10 bolts which measure as follows:
1 bolt with stud 6 5/8
1 bolt with stud 5 3/8
2 bolt with stud 3 7/16
2 bolt without stud 4 1/8
1 bolt without stuc 2 7/8
3 locking flange nuts, these nuts hold the front a/c compressor and power steer