Home > Exterior > Hood, Cowl
Choose a sub category:
Cowl Grill Fiberglass Hoods Hood Scoops
Windshield Wiper Hardware Hood Bumpers
Hood Insulation Pad Hood Prop Latches, Hinges
Sort By:
Page of 2
Lower windshield trim moldings that attach to the bottom of the windshield to the left and right of the cowl grille. This cowl grill is black in color and fits all styles of 1983-93 Mustangs: convertible, hatchback, coupe. Comes with the hardware! Factory Hood Prop Clip. Made of nylon and white in color. Hold hood prop down when not in use.

Lower windshield trim moldings that attach to the bottom of the windshield to the left and right of the cowl grille.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

This cowl grill is black in color and fits all styles of 1983-93 Mustangs: convertible, hatchback, coupe.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

Factory Hood Prop Clip. Made of nylon and white in color. Hold hood prop down when not in use.

Year Range: 88,89,90,91,92,93

This hardware is used to attach the 1983-93 cowl grille. It includes the nuts and the screws.
1979-93 Ford Mustang Hood Hinge Cup Set
Priced Individually $49.90
Our Price: 44.95
Savings: $4.95

This part is the rubber cup that goes between the cowl panel and the hood hinge.  In the original cup assemblies the metal insert inside the rubber cup commonly rots out causing the cowl panel to rot out.  Sold separately, two required per vehicle.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This hardware is used to attach the 1983-93 cowl grille. It includes the nuts and the screws.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

This part is the rubber cup that goes between the cowl panel and the hood hinge. In the original cup assemblies the metal insert inside the rubber cup commonly rots out causing the cowl panel to rot out. This is for a set of two.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

Wiper arm fits any 1979-93 Mustang.  Black in color.  Two required per vehicle, sold separately.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1989-93 Original Ford under hood light, socket and switch combo.

Year Range: 89,90,91,92,93

Lower windshield trim moldings that attach to the bottom of the windshield to the left and right of the cowl grille.

Year Range: 79,81,82

Windshield wiper blade.  Sold separately.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These are the clips that hold the lower windshield moldings in place.  2 required per side.  4 required per vehicle.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These are the three thin metal moldings around the top and sides of the front windshield for 1979-93 Coupe and Hatchback Mustangs. This set is made from original Ford tooling right here in the U.S.A. This is a high-quality part that fits like original! Powder coated trim black for a superior, durable factory color match. We ship these in a heavy duty reinforced tube to ensure safe delivery. They even come with step-by-step installation directions!

For the 1985-86 guys, these can be scuffed and painted Charcoal Grey to match your factory trim color!

Sold as a kit of three moldings which will do one Mustang.

Use part # 2279003, (Windshield Molding Clips) to install these moldings.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

Black plastic cowl grille that fits 1979-82 Mustang or 1979-86 Mercury Capri, all models. Made from original Ford tooling.

Year Range: 79,80,81,82

Hood scoop grill made of black plastic for 1979-81 Cobras and 1982 GTs. Made from original Ford tooling.

Year Range: 79,80,81

This is the 4 piece bolt set that holds the hood hinge to the cowl. This includes the two bolts for each hinge. If you need the nuts that the bolts screw into check out our 8  piece hood hinge bolt kit.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This 8 piece bolt kit is what holds the hood hinge to the cowl. This includes two bolts for each side with two special clip nuts. The clip nuts go into the metal cowl and have the threads that the bolts screw into.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1979-82 Hood Release Cable. This cable extends from under the dash with the handle labeled 'HOOD' all the way to the latch in the front bumper.

Year Range: 79,80,81,82

This is the complete hardware kit fot the 1979-93 hood. Hood Hinge to cowl and hood hinge to hood bolts and nuts.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the bolt that holds the hood hinge to the hood.  Sold as a set of 4, 4 required per vehicle.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the 8 peice kit that contains the 4 bolts and 4 nuts to hold the hood to the hood hinges.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the plastic NOS cover that sets under the wiper armand hides the nut holding the wiper arm to the regulator.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These were used on 83-84 GTs and the GT-350. Original Ford, NOS. Supply is limited.

Year Range: 83,84

Hood release cable for all 1983-93. Complete cable assembly including the handle with "HOOD" printed on it.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

These 6 screws hold the cowl grill down underneath the windshield. Correct for 1983-93 cowl grills.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

1983-93 Ford Mustang Cowl Kit
Priced Individually $108.83
Kit Price 88.95 Kit Saves You 19%
Savings: $19.88

These are the four nuts to attach the 1983-93 cowl grille.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

This kit includes:

  • 1983-93 cowl grill
  • 1983-93 cowl grill nuts & screws
  • 1983-93 lower windshield molding set
  • 1979-93 windshield washer nozzle
  • 1979-93 windshield washer nozzle screw

Year Range: 84,85,86,87,88,89,90,91,92,93

This hood will work for any 1983-86 Fox-body!

This Fiberglass Boss Pro-Cowl hood is a 3.25" Cowl Hood that incorporates true Cowl-Induction cooling in its design. The 5" of extra width at the rear of the cowl provides room for the largest of Fuel injected 351 engine combinations. It features a fully finished underside and weighs in at only 22 lbs. This hood features an innovative new cowl design that is 5" wider than any other cowl on the market. Also, the advanced profile gives the cowl the same clearance as a 4" cowl at the intake, yet levels off to 3.25" at the rear for maximum visiblity.

 

*This hood is drop shipped from the manufacturer and will arrive by truck frieght. This hood can only be shipped within the contiguous 48 US States. We may contact you for more shipping, depending on where you live within the US.

*We now offer shipping via GPX (a subsidiary of Greyhound) and this option is $75 flat shipping rate to anywhere in the US. To do this, you would need to pick your hood up at the nearest Greyhound station to you. To select this method of delivery, please call Customer Service at 1.866.496.7320. This option may take up to 2 weeks for delivery.

*Shipping to Alaska, Hawaii, Puerto Rico or internationally is cost prohibitive, however, if you would like a quote please contact Customer Service for assistance. 

*This item is not available for any promotional discounts or free shipping, no exceptions! 

 

CLICK HERE to view Installation Guide!

Year Range: 83,84,85,86

This hood will work for any 1987-93 Fox-body!

This Fiberglass Boss Pro-Cowl hood is a 3.25" Cowl Hood that incorporates true Cowl-Induction cooling in its design. The 5" of extra width at the rear of the cowl provides room for the largest of Fuel injected 351 engine combinations. It features a fully finished underside and weighs in at only 22 lbs. This hood features an innovative new cowl design that is 5" wider than any other cowl on the market. Also, the advanced profile gives the cowl the same clearance as a 4" cowl at the intake, yet levels off to 3.25" at the rear for maximum visiblity.

*This hood is drop shipped from the manufacturer and will arrive by truck frieght. This hood can only be shipped within the contiguous 48 US States. We may contact you for more shipping, depending on where you live within the US.

*We now offer shipping via GPX (a subsidiary of Greyhound) and this option is $75 flat shipping rate to anywhere in the US. To do this, you would need to pick your hood up at the nearest Greyhound station to you. To select this method of delivery, please call Customer Service at 1.866.496.7320. This option may take up to two weeks for delivery.

*Shipping to Alaska, Hawaii, Puerto Rico or internationally is cost prohibitive, however, if you would like a quote please contact Customer Service for assistance. 

*This item is not available for any promotional discounts or free shipping, no exceptions! 

CLICK HERE to view Installation Guide!

Year Range: 87,88,89,90,91,92,93

This will work for any 1987-93 Fox-body

The CyberStallion Hood is a 1.5" Ram-Air design that incorporates Cowl-Induction for a crossflow cooling effect. The aggressive profile give the same clearance as a 3" cowl at the intake, providing room for 4.6 Cobra motors with the blower on top. It features a fully finished show quality underside and weighs in at only 22 lbs.

 

*This hood is drop shipped from the manufacturer and will arrive by truck frieght. This hood can only be shipped within the contiguous 48 US States. We may contact you for more shipping, depending on where you live within the US.

*We now offer shipping via GPX (a subsidiary of Greyhound) and this option is $75 flat shipping rate to anywhere in the US. To do this, you would need to pick your hood up at the nearest Greyhound station to you. To select this method of delivery, please call Customer Service at 1.866.496.7320. This option may take up to two weeks for delivery. 

*Shipping to Alaska, Hawaii, Puerto Rico or internationally is cost prohibitive, however, if you would like a quote please contact Customer Service for assistance. 

*This item is not available for any promotional discounts or free shipping, no exceptions! 

 

CLICK HERE to view Installation Guide!

Year Range: 87,88,89,90,91,92,93

This hood will work for any 1987-93 Fox-body!

The Boss Cobra R hood (95 Style) is a 3" Cowl Hood that incorporates true Cowl-Induction cooling in its design. The extra width of the cowl provides room for the largest of Fuel injected 351 engine combinations. It features a fully finished underside and weighs in at only 22 lbs.

*This hood is drop shipped from the manufacturer and will arrive by truck frieght. This hood can only be shipped within the contiguous 48 US States. We may contact you for more shipping, depending on where you live within the US.

*We now offer shipping via GPX (a subsidiary of Greyhound) and this option is $75 flat shipping rate to anywhere in the US. To do this, you would need to pick your hood up at the nearest Greyhound station to you. To select this method of delivery, please call Customer Service at 1.866.496.7320. This option may take up to two weeks for delivery. 

*Shipping to Alaska, Hawaii, Puerto Rico or internationally is cost prohibitive, however, if you would like a quote please contact Customer Service for assistance. 

*This item is not available for any promotional discounts or free shipping, no exceptions! 

 

CLICK HERE to view Installation Guide!

Year Range: 87,88,89,90,91,92,93