Home > Shows, News & Info > New Parts
Sort By:
Page of 1
These two clear tag light lens come with the mounting hardware as well as two white LED bulbs. These LED bulbs are much brighter than the stock incandescent bulbs and will fit directly into the stock sockets with no modifications needed.
This complete set of LED bulbs will brighten up your instrument cluster! It includes all of the different color bulbs to coincide with your green turn signals, your blue high beam indicator and so on. These LED bulbs install just like the stock incandescent bulbs without any modifications needed and will work with your dimmer switch (will not dim back down to stock light levels). The 1979-86 cars may have a bulb or two left over when using this kit.

NOTE: Bulbs are polarity sensitive. If bulb does not light on installation, remove, rotate and reinstall.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

These two clear tag light lens come with the mounting hardware as well as two white LED bulbs. These LED bulbs are much brighter than the stock incandescent bulbs and will fit directly into the stock sockets with no modifications needed. Fits 1979-93, all models. One kit per vehicle.


Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1983-93 License plate bracket for all 1983-1993 LX and 1983-86 GT.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

This is the nozzle that bolts to the bottom of and then sticks through your cowl grill and sprays water onto your windshield. This part is made with the original Ford tooling for a perfect fit!

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This molding attaches to the rear of the driver's fender in front of the door. These are ready to install with self-adhesive tape already attached. LX and GT.

Year Range: 85,86

This molding attaches to the rear of the passenger's fender in front of the door. These are ready to install with self-adhesive tape already attached. LX and GT.

Year Range: 85,86

This is the low-note horn. You need one low-note and one high note horn per vehicle. See below for the high note. Comes with the hardware and instructions as shown.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the high-note horn. You need both a high note and a low note horn per vehicle. See the low note horn below. Comes with hardware and instructions shown.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

We may be able to rebuild your existing computer provided that it does not have a fuel pump run-on problem. The rebuild charge is $225. Please call 704.888.1278 for more information.

This is an original Ford A9L computer that has been completely inspected, rebuilt and tested. The A9L computers were used only in the 5.0 5-speed cars. They are mass-air computers so if you are doing a mass-air conversion you will need to replace your computer with an A9L. Fox Mustang Restoration wants your old A9L or A9P. Just ship us your old A9L or A9P, they do not need to be in working condition, and we will give you a store credit of $150. Our shipping address is: Fox Mustang Restoration, 105 Pine Forest Rd, Locust, NC 28097. Put on the outside of the box "A9P" or "A9L" and put on the inside of the box your name, phone number, email address and shipping address. We will send you a confirmation email with your store credit information.
This sending unit will fit the following Mustangs:

1983-85 fuel injected 4 cylinder turbo charged

1984-86 SVO

1986 GT

1984-1985 V-8 with an automatic transmission

This is an exact reproduction with no modifications needed.
Is your 1987-1993 Mustang fuel gauge not working? It might just be your sending unit that's the problem.These replacement units come with the seal but the lock rings are not included with sending unit.Don't forget the fuel pump locking ring that holds it to the tank!

This sending unit will fit the following Mustangs:

1983-85 fuel injected 4 cylinder turbo charged

1984-86 SVO

1986 GT

1984-1985 V-8 with an automatic transmission

This is an exact reproduction with no modifications needed. The resistance range is 80-10 ohms.

Attaches to the front of the quarter panel on the passenger's side. These are ready to install with self- adhesive tape already attached. Correct for LX only, but will fit a GT. Paint to match.

Year Range: 85,86

This manual is every 1979-93 Mustang exploded part diagram from the original Ford manuals. All car styles (hatch, coupe, convertible), motors and accessory options are included. It has interior, exterior, under hood, hatch area, brakes, wiring, and more.
This manual is every 1979-93 Mustang exploded part diagram from the original Ford manuals. All car styles (hatch, coupe, convertible), motors and accessory options are included. It has interior, exterior, under hood, hatch area, brakes, wiring, emissions. It is literally every diagram with descriptions.

This is an amazing resource if you aren't sure what parts you need or if you are trying to figure out how something goes back together. This manual is officially licensed by Ford.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This is the bushing that snaps into the door latch and then the rod on the end of the door lock actuator goes through the bushing. One required per door. Sold separately.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

Plastic bezel that covers the seat belt plunger in the door jamb.

Year Range: 79,80,81,82,83,84,85,86,87,88,89

1989-93 Ford Mustang Convertible Door Belt Molding & Extension Kit
Priced Individually $74.85
Kit Price $49.95 Kit Saves You 33%
Savings: $24.90

This is the complete o-ring kit for a 1983-93 factory a/c kit. For helpful a/c information click here.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

This is a four piece exterior door belt molding set. This kit is for all 1989-1993 Mustang Convertibles. This attaches to the top of the door. The door belt moldings goes right beside the exterior door belt, sometimes called a dew wipe. The extensions attach to the end of the door bolt moldings just above the side view mirror. This kit also comes with the attachment hardware for the door belt moldings. Hardware for the extension is not included. Late 1988 convertibles and t-tops also use these moldings if the side view mirror is bolted to the side of the door below the belt moldings.

These are the rear interior hatch panels at the tail lights. Replace your scratched up or cracked panels with these brand new ones made from original Ford tooling for a perfect fit. We also carry the hardware to install them, so check that out below.

Year Range: 87,88,89,90,91,92,93

These are the rear interior hatch panels at the tail lights. Titanium Gray is the correct gray for all 1990-92 Ford Mustangs, but these will fit all 1987-93. Replace your scratched up or cracked panels with these brand new ones made from original Ford tooling for a perfect fit. We also carry the hardware to install them, so check that out below.

Year Range: 87,88,89,90,91,92,93

These are the rear interior hatch panels at the tail lights. Smoke Gray is the correct gray for all 1987-89 Ford Mustangs, but these will fit all 1987-93 and are the closest gray to the Opal Gray that was used in 1993. Replace your scratched up or cracked panels with these brand new ones made from original Ford tooling for a perfect fit. We also carry the hardware to install them, so check that out below.

Year Range: 87,88,89,90,91,92,93

This rubber plug fills the hole that is created in the door jamb when you upgrade to new seat belt assemblies. It fills the hole where the plastic plunger used to stick out.

Year Range: 79,80,81,82,83,84,85,86,87,88,89