Home > Exterior > Trim
Choose a sub category:
Body Side Moldings Door Hardware
Roof Rail, Drip Rail Windshield Hatch, Trunk
Sort By:
Page of 3
1979-93 Coupe and hatch back windshield molding mounting clips. Kit has 13 pieces. Lower windshield trim moldings that attach to the bottom of the windshield to the left and right of the cowl grille.
1987-93 Ford Mustang LX 10 Piece Body Side Molding Kit
Priced Individually $379.50
Kit Price $304.95 Kit Saves You 20%
Savings: $74.55

This is a 10 piece body side molding kit. Kit includes the following:

RH and LH Door Side Moldings

RH and LH Front of Fender Moldings

RH and LH Rear of Fender Moldings

RH and LH Front of Quarter Moldings

RH and LH Rear of Quarter Moldings

Year Range: 87,88,89,90,91,92,93

1979-93 Coupe and hatch back windshield molding mounting clips. Kit has 13 pieces.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

Lower windshield trim moldings that attach to the bottom of the windshield to the left and right of the cowl grille.

Year Range: 83,84,85,86,87,88,89,90,91,92,93

These outer belt moldings attach to the top of the door next to the dew wipe. This is a reproduction set (both sides) and comes with attaching hardware. This kit does not include the dew wipe, but see below if you need both the dew wipe and this molding. Rivets are black in color. One set required per door. These outer belt moldings attach to the top of the door next to the dew wipe. This is a reproduction set (both sides) and comes with attaching hardware. This kit does not include the dew wipe, but see below if you need both the dew wipe and this molding.
1987-93 Ford Mustang Roof Rail & Door Belt Molding Kit
Priced Individually $115.00 Kit Saves You 20%
These outer belt moldings attach to the top of the door next to the dew wipe. This is a reproduction set (both sides) and comes with attaching hardware. This kit does not include the dew wipe, but see below if you need both the dew wipe and this molding. Fits coupe, hatchback and convertibles.

Rivets are black in color. One set required per door.

Fits Ford Mustang Year: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

This kit includes:
1 RH Roof Rail Molding
1 LH Roof Rail Molding
1 RH Door Belt Molding
1 LH Door Belt Molding
1 Belt Molding Hardware Set

1979-84 Ford Mustang 10 Piece Body Side Molding Kit
Priced Individually $401.66
Kit Price $349.95 Kit Saves You 15%
Savings: $51.71
1987-93 Ford Mustang LX 6 Piece Body Side Molding Kit
Priced Individually $269.70
Kit Price $229.95 Kit Saves You 15%
Savings: $39.75
1979-84 Ford Mustang 6 Piece Body Side Molding Kit
Priced Individually $279.78
Kit Price $249.95 Kit Saves You 10%
Savings: $29.83

This is a 10 piece body side molding kit. Kit includes the following:

RH and LH Door Side Moldings

RH and LH Front of Fender Moldings

RH and LH Rear of Fender Moldings

RH and LH Front of Quarter Moldings

RH and LH Rear of Quarter Moldings

Since there were dozens of strip colors available for these years, we have not added any pin stripes to this molding. You can put on vinyl pin striping tape or paint the stripes in.

Year Range: 79,80,81,82,84

This kit includes the following LX molding pieces:
Front of Quarter RH
Front of Quarter LH
Rear of Fender RH
Rear of Fender LH
LX Door Molding LH
LX Door Molding RH

This kit includes all of the stick on body side moldings.

Year Range: 87,88,89,90,91,92,93

This kit includes the following 79-84 molding pieces:
Front of Quarter RH
Front of Quarter LH
Rear of Fender RH
Rear of Fender LH
Door Molding LH
Door Molding RH

Since there were dozens of strip colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.

Year Range: 79,80,81,82,83,84

Attaches to the driver's door.  These are ready to install with self-adhesive tape already attached.  Fits GT only.  Paint to match. Attaches to the passenger's door.  These are ready to install with self-adhesive tape already attached.  Fits GT only.  Paint to match.
1987-93 Ford Mustang GT Door Body Side Molding Kit
Priced Individually $139.90
Kit Price $118.95 Kit Saves You 15%
Savings: $20.95

Attaches to the driver's door. These are ready to install with self-adhesive tape already attached. Fits GT only. Paint to match.

Year Range: 87,88,89,90,91,92,93

Attaches to the passenger's door. These are ready to install with self-adhesive tape already attached. Fits GT only. Paint to match.

Year Range: 87,88,89,90,91,92,93

This kit is for the left and right door body side molding.

Year Range: 87,88,89,90,91,92,93

1979-93 rear window molding clips for a coupe.  This kit has 19 pieces, including 5 of the hard-to-find round discs. 1979-93 Gas tank door bumpers.  One set required per vehicle. 1979-86 Dew Wipe Molding Hardware Kit.   Kit comes with 7 retaining clips and the barrel nuts that fit into the holes in the top of the door.  The clips attach to the underside of the dew wipe molding and snap into the nuts in the door.

1979-93 rear window molding clips for a coupe. This kit has 19 pieces, including 5 of the hard-to-find round discs.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1979-93 Gas tank door bumpers. One set required per vehicle.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1979-86 Dew Wipe Molding Hardware Kit. Kit comes with 7 retaining clips and the barrel nuts that fit into the holes in the top of the door. The clips attach to the underside of the dew wipe molding and snap into the nuts in the door. Used on all 1979-82 Mustangs as well as all 1983-1986 convertibles. One kit required per door.

Year Range: 79,80,81,82,83,84,85,86

1979-84 Mustang Door Body Side Molding Set
Priced Individually $179.98
Kit Price $139.95 Kit Saves You 22%
Savings: $40.03
This kit is for the left and right door body side moldings. These will fit any 1979-1984 Mustang and Mercury Capri. Correct for the 1979 Pace Car, Cobra, L, GL, GLX, GT, and RS models. Comes with double-sided tape attached to the back for easy peel & stick application.

Since there were dozens of strip colors available for these years, we have not added any pin stripes to these moldings. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin-striping tape or paint the stripes in.

Year Range: 1979,1980,1981,1982,1983,1984

This is the right hand or passenger's side door body side moldings. It will fit any 1979-1984 Mustang and Mercury Capri. Correct for the 1979 Pace Car, Cobra, L, GL, GLX, GT, and RS models. Comes with double-sided tape attached to the back for easy peel & stick application.

Since there were dozens of strip colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.

Year Range: 1979,1980,1981,1982,1983,1984

This is the left hand or driver's side door body side moldings. It will fit any 1979-1984 Mustang and Mercury Capri. Correct for the 1979 Pace Car, Cobra, L, GL, GLX, GT, and RS models. Comes with double-sided tape attached to the back for easy peel & stick application.

Since there were dozens of strip colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.

Year Range: 1979,1980,1981,1982,1983,1984

This Molding goes on the front of the fender between the front bumper cover and the front tire. This is for the passenger's side. The molding is made of urethane, like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of strip colors available for these years, we have not added any pin stripes to this molding. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the front of the fender between the front bumper cover and the front tire. This is for the driver's side. The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the rear of the fender between the front tire and the door. This is for the passenger's side. The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the rear of the fender between the front tire and the door. This is for the driver's side The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the front of the quarter panel between the rear tire and the door. This is for the passenger's side The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the front of the quarter panel between the rear tire and the door. This is for the driver's side. The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. There is a slight indention for each pin stripe to act as a guide. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the rear of the quarter panel between the rear bumper cover and the rear tire. This is for the passenger's side. The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. You can put on vinyl pin striping tape or paint the stripes in.
This molding goes on the rear of the quarter panel between the rear bumper cover and the rear tire. This is for the driver's side. The molding is made of urethane like the originals. Comes with automotive-grade double-sided tape already installed for easy installation.

Since there were dozens of stripe colors available for these years, we have not added any pin stripes to this molding. You can put on vinyl pin striping tape or paint the stripes in.
These are the replacement studs for your window molding clips.

Year Range: 79,80,81,82,83,84,85,86,87,88,89,90,91,92,93

1985 - 93 Fender / Quarter Body Side Molding Hardware. Kit comes with 4 nuts that are used to hold the hard plastic body side moldings on the front fender and rear of quarter panel. Kit does 1 molding
1985-86 Ford Mustang Body Molding Set 4 Piece
Priced Individually $115.80
Kit Price $97.95 Kit Saves You 15%
Savings: $17.85
This body side molding stripe fits 1987-93 GT Mustangs. The tape measures 1" wide and has plenty of length to do all of your moldings and then some. It adds a nice contrast to mono-tone or two-tone paint jobs.

Year Range: 87,88,89,90,91,92,93

1985 - 93 Fender / Quarter Body Side Molding Hardware. Kit comes with 4 nuts that are used to hold the hard plastic body side moldings on the front fender and rear of quarter panel. Kit does 1 molding

Fits Ford Mustang Year: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Year Range: 85,86,87,88,89,90,91,92,93

Hard plastic body moldings that attach to the side quarter panels next to the bumper cover and front fenders next to the bumper cover.  Correct for 85-86 GT and LX.  Gray in color.  Made from original Ford tooling. The Gray's do not match, and these moldings are paint to match.

Year Range: 85,86